CLADDING SYSTEMS FOR DEKTON
SIMPLE PANELLING SYSTEM
The cladding of indoor and outdoor walls can be achieved by a single cladding system, by applying adhesive cement plaster directly on the outside of the building or the interior support wall, where the Dekton pieces are stuck.
MIXED PANELLING SYSTEM
The cladding of indoor and outdoor walls by mixed panelling, consists of the combination of cement adhesives, with the use of mechanical reinforcing elements embedded in the separation joints between Dekton pieces and mechanically fixed to the enclosure.
DRY PANELLING SYSTEM
The cladding of indoor and outdoor walls by dry veneer, consists of using a metal substructure affixed to the enclosure, to which the Dekton pieces are stuck.
PROPERTIES
THAT MAKE DEKTON IDEAL FOR INDOOR AND OUTDOOR COVERINGS.
- 320 cm. x 144 cm. large format
- Versatility of formats
- Thicknesses of 8 mm.,12 mm. and 20 mm. (depending on the requirements of the project)
- High flexural strength.
- Excellent dimensional stability, reduced joints.
- Colour stability.
- Possibility of endless design: format, details, joints, colours...
- Resistance to freezing and thawing.
- Reduced porosity and good maintenance and cleaning.
INSTALLATION RECOMMENDATIONS
- Large format design possibilities.
- Reduced 2 mm joints between pieces.
- Reduced 2 mm joints between pieces.
- Respect the building's expansion joints.
- The use of C2E adhesives according to Standard EN 12004 is recommended.Download documentation
